Thursday 9 February 2017

MakeTronix Alarm and GPIOZero on Raspberry Pi

I funded the MakeTronix Alarm on IndieGoGo because it contains many of the components I usd with Raspberry Pi at CoderDojo, but in one compact package. Don't get me wrong, I'm all in favour of having learners build the circuit using a breadboard, but sometimes there just isn't the time to do that and code it.

The board arrived very quickly and it is a nice, neat package. I was pleased that they kept the board to 26 pins as this will enable it to work with my trusty set of original mode Bs.

The online documentation is easy to find but I have to say I found it a little disappointing. It seems weird to not show a picture of the board mounted on a Pi in the “connecting the board” section. The written description is entirely accurate but a simple diagram would be much better, especially for younger users. I was also surprised to find that the code examples downloaded from the MakeTronix github don't use gpiozero. There's nothing wrong with using the Rpi.GPIO library – it works perfectly – but I believe  gpiozero is much better for those who are new to Python and this board is being marketed as a “fantastic educational circuit board for learning programming”. They've tried to abstract out the key functions into a library file that the other examples import, but this feels a bit unwieldy, again especially for novice Pythonistas.

I also couldn't get the full alarm code to work. It turned out this was nothing to do with the code: the PIR that shipped with my kit didn't work correctly and would not trigger on motion at any sensitivity. Luckily I have plenty of these PIRs and substituting in a replacement got everything working.

Nevertheless I decided to write a gpiozero version. It uses a couple of lambda functions which you might argue are too opaque for beginners (and I'd probably agree) but they do remove the need to give each button its own when_pressed function individually.

Here's why I love gpiozero – all sorts of hardware control is possible with simple, easy to understand syntax. My MTAlarm code does the following:

1. Activates the PIR and waits for motion to be detected. The LED glows/pulses to indicate that the alarm is active.

2. When motion is detected, the LED starts flashing.


3. If within 10 seconds  the correct code is entered (each key beeps when pressed and DEL acts as backspace) the alarm is disabled.






If not, the buzzer starts to beeeeeep constantly.



6 comments:

  1. Nice post,thank you for this blog.check my website

    ReplyDelete
  2. Your content helped me a lot to take my doubts, amazing content, thank you very much for sharing. Visit Webkinz gift card

    ReplyDelete
  3. CCTV Wholesaler-These CCTVS Are A Must Buy. Their CCTV has high resolution, and they sell the products without any wear and tear. You will not find even a single scratch on their CCTVs. And they are priced as well quite nominal. Also, they are actually a CCTV wholesaler,and not just retailer.

    ReplyDelete
  4. TouchTec is a leading company in region with more than 10 years of experience that provides Security, Safety and Surveillance Solutions with high assurance to improve security and efficiencies for identity management, access to critical facilities, intelligence analysis, guest worker programs, and national identity programs
    CCTV for School
    Cctv Camera for Office

    ReplyDelete
  5. I want you to thank for your time of this wonderful read!!! I definitely enjoy every little bit of it and I have you bookmarked to check out new stuff of your blog. I am glad to share a brilliant post about BSL Shaders Minecraft pe which totally change your Minecraft world's appearance. I hope you will really enjoy this shader pack.

    ReplyDelete
  6. Your content helped me a lot to take my doubts, amazing content, thank you very much for sharing. Visit cholafin share price for new amazing game

    ReplyDelete